Zintec Zinc Coated Steel Sheet Suppliers to BS EN 10152 from 0.7 – 3.0mm

Clifton Steel Ltd

Zintec

We stock Prime Zintec sheet and coil in widths of 1000mm & 1250mm and thicknesses from 0.7mm – 3.0mm. As with all our coil products Zintec can be decoiled panel flat to your specific length to a tolerance of +/- 0.2mm.

Zintec is supplied to the following British Standard:
BS EN 10152 : 2009 DC01 + ZE 2.5 Microns Each Side Surface A Treatment C

	1000	1250	1500
0.7
0.9
1.2
1.5
2.0
3.0

Services

Laser Cut Blanks & Profiles

We are now able to Laser Cut blanks and profiles from 0.3mm - 25mm in Stainless & Mild Steel and 15mm in Aluminium. All we require is a .dxf or .dwg drawing file to process and cut the blanks.

If you would like a quote on some Laser blanking or profiling don't hesitate to contact our sales department on 0121 603 4000.

If you wish to read more about our laser cutting services please click here.

Decoiling

We are able to decoil and fully flatten Aluminium, Stainless or Mild Steel into sheet in your specific sizes with tolerances as tight as +/- 0.5mm. Our Herr Voss leveller will ensure that every sheet is panel flat. We can cut sheets up to 12m long and 1830m wide.

Multi-Strand Blanking

We can cut Aluminium, Stainless or Mild Steel into blanks straight from coil at up to 84 metres per minute with our Red Bud Multi Strand Blanking line.

Shearing

We are able to shear blanks up to 3600mm long and up to 6.5mm thick on our Cincinatti Shear. If you have a shearing enquiry call us on 0121 603 4000 or email enquiries@cliftonsteel.co.uk with your specific enquiry.